Duct wrap and seam tape
Wrap on supply and return ducts, and the tape along its seams, is sampled before the system is touched.
Typical cost in Torrance
Wrapped ducts and old pipe insulation may contain asbestos, and the wrap can look the same whether it does or not. Samples go to a lab before anyone cuts or tears the wrap.
Rule 1403 puts HVAC systems under renovation, so replacing ductwork starts with the survey, before any duct is touched.

Wrap on supply and return ducts, and the tape along its seams, is sampled before the system is touched.
Insulation on pipes is sampled apart from duct wrap, since the two are different materials and can test differently.
Ducts in an attic or under the floor go through the same survey and the same sample plan as ducts inside the walls.
A furnace or air handler replacement that removes old ducts follows one order. The survey comes first, then the lab results, then a plan for the asbestos before the new equipment goes in.
Duct work and asbestos work share the same space, so your heating contractor and our crew need to agree on one schedule. If the work means the heat goes off, settle the timing with your heating contractor before we set up.
Insulation that crumbles or powders is friable asbestos waste, which California handles as hazardous waste.
Ask your contractor for the CSLB license number. The Contractors State License Board lists the C-22 Asbestos Abatement classification for abatement, which covers containment, encapsulation, removal and disposal, and both the license and Cal/OSHA registration come into play at 100 square feet or more of asbestos-containing material.
Ducts start with a survey, so read about asbestos testing, or go back to the home page.
We recommend calling, but do feel free to contact us using this form. We'll get back to you with a free, personalized quote or additional questions as soon as possible. We're here to help.
Call (424) 435-4819